Gear reduction autoshift fix install and order info. - Page 2 - Honda Rincon Forum : RinconRiders Honda Rincon Forums
Reply
 
LinkBack Thread Tools
post #11 of 25 (permalink) Old 07-05-2010, 12:29 PM
Member
 
RinconFun's Avatar
 
Join Date: Dec 2005
Location: Anchorage
Posts: 268
Here is what I just sent to Christy:


Ma'am,

I am interested in the new Honda Rincon Speed Sensor Control Module that your company is making.

JDC, on www.RinconRiders.com has informed us that your company is now making a control module that will fix the speed sensor issues that everyone is having with thier Rincon's when installing a different lower gear sets into the transmissions. I am very interested in getting this module for my '03 Honda Rincon.

Here is what I would need the module to be set up for:

'03 Honda Rincon 650
Big Red Gear Reduction Kit
Miles Per Hour
Cost + Shipping to Zip Code 99518 (Anchorage, Alaska)

I don't know if needing it in MPH vs KPH matters but I figured I'd let you know eitherway.

Thank you.

2003 Rincon: 25" Goodyear Mudrunners, Big Red Gear Reduction, Elka Shocks w/ Remote Reservoirs, Rubicon 3rd Light, Hand & Thumb Warmers, Meier Hand guards. Warn Front Bumper, Montana Jacks Receiver System, Warn 3.0ci w/ Synthetic Rope, HL Front Disk Brakes, Harley Dog A/F Screw, Clipped Carb Spring, Twin PIAA 520 Super White Driving Lights, Vision X 8" Xmitter LED Light Bar, ITP Rims, HL Fender Brackets, Extreme 2" Lift (more like 1 - 1.5" lift"), PRM-ATV Full Length Aluminum Skid Plate & Front Bash Plate, Scary Fast PowerNow Carb Insert, Dual-Battery System
RinconFun is offline  
Sponsored Links
Advertisement
 
post #12 of 25 (permalink) Old 07-05-2010, 03:03 PM Thread Starter
Senior Member
 
Join Date: Nov 2008
Location: Edmonton
Posts: 101
MP/H or KM/H does not matter. The unit works off the number of pulese that the speed sensor reads and adds a few to bring it back to the regular amount so that the computer will shift as normal.

As for shipping it's your choice on how fast you want it. the faster you want it the more it will cost.

A dynatech should not should not make any difference to how this unit works.

07 rinny TJD X gen tracks or 30" zillas on 14" DWT Diablo chrome wheels. Detriot Locker, BRGR with Autoshift fix, Elka shocks piggy back front's full remote rears. quadracks 1.5 lift. 4 Zone hand and thumb warmers. Warn xt 3000. HMF swamp series.
vanisle is offline  
post #13 of 25 (permalink) Old 07-05-2010, 08:39 PM
Member
 
RinconFun's Avatar
 
Join Date: Dec 2005
Location: Anchorage
Posts: 268
JDC,

SWEET! Now I wait for a reply from Christy!

Thanks again for all the information!

2003 Rincon: 25" Goodyear Mudrunners, Big Red Gear Reduction, Elka Shocks w/ Remote Reservoirs, Rubicon 3rd Light, Hand & Thumb Warmers, Meier Hand guards. Warn Front Bumper, Montana Jacks Receiver System, Warn 3.0ci w/ Synthetic Rope, HL Front Disk Brakes, Harley Dog A/F Screw, Clipped Carb Spring, Twin PIAA 520 Super White Driving Lights, Vision X 8" Xmitter LED Light Bar, ITP Rims, HL Fender Brackets, Extreme 2" Lift (more like 1 - 1.5" lift"), PRM-ATV Full Length Aluminum Skid Plate & Front Bash Plate, Scary Fast PowerNow Carb Insert, Dual-Battery System
RinconFun is offline  
post #14 of 25 (permalink) Old 07-08-2010, 06:22 PM
Member
 
JCR680's Avatar
 
Join Date: Jun 2006
Location: Valdosta
Posts: 847
Let us know how this works out?

MY QUADS

06 RINCON(green)
- ATV-GURU Rear bumper
- 26" tires
- highlifter front springs
- custom snorkle
- 2 inch tip

04 RUBICON(yellow)
- 26" tires
- 2 inch tip

86 YAMAHA BADGER 80(red)
- stock

06 SUZUKI 50(white)
- custom snorkel
- custome exhaust
JCR680 is offline  
post #15 of 25 (permalink) Old 07-29-2010, 05:44 PM
Member
 
Batman's Avatar
 
Join Date: Mar 2009
Location: Byhalia
Posts: 1,130
I am goin to let a couple of my friends know about this, cause they might want me to get this thing ordered and installed for them. I am glad someone has finally come out with this.

Batman

2007 Green Honda Rincon, 2009 Polaris 850XP with plenty of goodies!!!! Gone but never Forgotten.

2012 Polaris RZR XP White LE
Batman is offline  
post #16 of 25 (permalink) Old 07-29-2010, 07:22 PM
Member
 
RinconFun's Avatar
 
Join Date: Dec 2005
Location: Anchorage
Posts: 268
I have one on order, it has shipped so as soon as I get it I will install it and let everone know how well it works. I am hoping that it arrives soon!

Fron Canada to China, then on to Cuba via Russia and Iran and then it should come to Alaska. It could be a little while but it was shipped last week.

2003 Rincon: 25" Goodyear Mudrunners, Big Red Gear Reduction, Elka Shocks w/ Remote Reservoirs, Rubicon 3rd Light, Hand & Thumb Warmers, Meier Hand guards. Warn Front Bumper, Montana Jacks Receiver System, Warn 3.0ci w/ Synthetic Rope, HL Front Disk Brakes, Harley Dog A/F Screw, Clipped Carb Spring, Twin PIAA 520 Super White Driving Lights, Vision X 8" Xmitter LED Light Bar, ITP Rims, HL Fender Brackets, Extreme 2" Lift (more like 1 - 1.5" lift"), PRM-ATV Full Length Aluminum Skid Plate & Front Bash Plate, Scary Fast PowerNow Carb Insert, Dual-Battery System
RinconFun is offline  
post #17 of 25 (permalink) Old 07-29-2010, 10:22 PM Thread Starter
Senior Member
 
Join Date: Nov 2008
Location: Edmonton
Posts: 101
Sorry about the delay in getting yours rinconfun. i'm not working at Rapid full time any more so it took a longer to get the unit shipped out. As for shipping although you are just up the alaska hiway from us i'm sure it sent back done to the lower 48 states before heading back north. Keep me informed on how the install went and if any issue come uo related to the install.

07 rinny TJD X gen tracks or 30" zillas on 14" DWT Diablo chrome wheels. Detriot Locker, BRGR with Autoshift fix, Elka shocks piggy back front's full remote rears. quadracks 1.5 lift. 4 Zone hand and thumb warmers. Warn xt 3000. HMF swamp series.
vanisle is offline  
post #18 of 25 (permalink) Old 10-31-2010, 10:01 AM
Junior Member
 
Join Date: Oct 2010
Location: Salmon arm
Posts: 23
So how does this thing working out for you ?

2008 rincon 680. 28"s on 14" SS, BRGR, mudbuster cam, supertrapp idx, power commander, 2.5" lift, AArm plates, 3.0 warn, front and rear quadrax bumpers, dual five stage hand warmer, and misc...
Realfrenchy is offline  
post #19 of 25 (permalink) Old 11-01-2010, 09:36 PM Thread Starter
Senior Member
 
Join Date: Nov 2008
Location: Edmonton
Posts: 101
I've had the original test unit in my quad for almost a Year now without a single issue. If you want to make a 1000 km trip over the rockies you can test ride mine and i will help you install yours.

07 rinny TJD X gen tracks or 30" zillas on 14" DWT Diablo chrome wheels. Detriot Locker, BRGR with Autoshift fix, Elka shocks piggy back front's full remote rears. quadracks 1.5 lift. 4 Zone hand and thumb warmers. Warn xt 3000. HMF swamp series.
vanisle is offline  
post #20 of 25 (permalink) Old 11-02-2010, 09:15 PM
Junior Member
 
Join Date: Oct 2010
Location: Salmon arm
Posts: 23
Nice, would love to but not right now have to much work. i went riding in alberta lots last year. lots of fun. i ordered mine just waiting for it now.

how is your rinny with 30s. i have a brgr too and have a hell of time with 28s.

2008 rincon 680. 28"s on 14" SS, BRGR, mudbuster cam, supertrapp idx, power commander, 2.5" lift, AArm plates, 3.0 warn, front and rear quadrax bumpers, dual five stage hand warmer, and misc...
Realfrenchy is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Honda Rincon Forum : RinconRiders Honda Rincon Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome