Rincon Bolt Pattern - Honda Rincon Forum : RinconRiders Honda Rincon Forums

Chad_75019 · 02-15-2009, 08:05 PM

Have a buddy selling some rims/tires with a 4/110 bolt pattern, will those fit 2007 rincon?

S.A.Rinconrider · 02-15-2009, 08:21 PM

Yes sir they sure will as long as the offset iscorrect.

Chad_75019 · 02-15-2009, 08:27 PM

what should the offset be? I think he bought them for a canam but the bolt pattern wont fit. there 26x10x12 front 26x12x12 reat brand new itp mudlights with itp rims for $450

comtnman · 02-15-2009, 08:48 PM

I believe the offset is 5+2...

Some more info here...

http://www.rinconriders.com/index.cfm?action=thread&catid=26&topid=148&thrid=4 8329#p518458

03rin · 02-15-2009, 08:52 PM

What CO said. There aren't many aftermarket wheels that will have the same off set that stock has. Most sra atv's are going to have a different offset than irs has.

Littlegrasshopper · 02-15-2009, 09:17 PM

Do the depth to the inside of both the front and the rear look the same? The reason I ask is alot of atvs running the 4/110 bolt pattern have staright axles on the rear and thus the rear offset is different from the front. A Rincon basically uses 4 fronts. If the depth from the outside of the rim to the inner bolt ring looks to be only 2-3in then they will work fine. If they are deeper (like 4-5in) that would be what are refered to as "rear offset" which will work but will stick out past the fenders a good bit.

Maybe that makes sense.

dcfox · 02-15-2009, 09:22 PM

With the Can Am being an IRS bike...good chance they may fit ok.

Heck...if they are SRA offset...and you don't mind getting a little muddy...they would still work.

02-15-2009, 08:05 PM	#1 (permalink)
Chad_75019 Junior Member Join Date: Sep 2008 Location: Ennis Posts: 20	Rincon Bolt Pattern Have a buddy selling some rims/tires with a 4/110 bolt pattern, will those fit 2007 rincon?

02-15-2009, 08:21 PM	#2 (permalink)
S.A.Rinconrider Senior Member Join Date: Jul 2006 Location: Murfreesboro Posts: 3,141	Yes sir they sure will as long as the offset iscorrect. __________________ 2005 Red Honda Rincon. Used to be green but red is faster.

02-15-2009, 08:48 PM	#4 (permalink)
comtnman Senior Member Join Date: Feb 2004 Location: Colorado Springs Posts: 3,624	I believe the offset is 5+2... Some more info here... http://www.rinconriders.com/index.cfm?action=thread&catid=26&topid=148&thrid=4 8329#p518458 __________________ [br]In Colorado We Stay The Trail [br]2004 Yellow Rincon.[br]25" ITP ATRs.[br] Dyno Jet Needle, 2nd notch. 152 Keihin main jet. [br]Uni Filter. 2 TPI Valves.[br]NGK IFR5L 11 Plug.[br]Magellan Meridian Gold GPS on a Ram Mount. [br]Mobil 1 Racing 4T 10W-40. JASO MA Certified.

02-15-2009, 08:52 PM	#5 (permalink)
03rin Senior Member Join Date: Dec 2004 Location: Fort Fairfield Posts: 5,576	What CO said. There aren't many aftermarket wheels that will have the same off set that stock has. Most sra atv's are going to have a different offset than irs has. __________________ 2003 Red Rincon, clipped carb spring, WES rear seat and footpegs, ARB windshield, 2500# Ramsey winch with Amsteel synthetic cable, Montana Jack's receiver, Kimpex snowblower, 26" mud Lites, 2" Aluminum tip, handwarmers, Warn back-up lights and 55w driving lights.

02-15-2009, 09:17 PM	#6 (permalink)
Littlegrasshopper Member Join Date: Feb 2007 Location: Nashville, GA Posts: 8,082	Do the depth to the inside of both the front and the rear look the same? The reason I ask is alot of atvs running the 4/110 bolt pattern have staright axles on the rear and thus the rear offset is different from the front. A Rincon basically uses 4 fronts. If the depth from the outside of the rim to the inner bolt ring looks to be only 2-3in then they will work fine. If they are deeper (like 4-5in) that would be what are refered to as "rear offset" which will work but will stick out past the fenders a good bit. Maybe that makes sense. __________________ My mind thinks in broken English. It's so bad I think I need to find me a translator. 2009 Polaris 850 XP ~~~~~~~~ ><((((0>

02-15-2009, 08:27 PM	#3 (permalink)
Chad_75019 Junior Member Join Date: Sep 2008 Location: Ennis Posts: 20	what should the offset be? I think he bought them for a canam but the bolt pattern wont fit. there 26x10x12 front 26x12x12 reat brand new itp mudlights with itp rims for $450

02-15-2009, 09:22 PM	#7 (permalink)
dcfox Member Join Date: Mar 2008 Location: Beaumont Posts: 766	With the Can Am being an IRS bike...good chance they may fit ok. Heck...if they are SRA offset...and you don't mind getting a little muddy...they would still work. __________________ --David ----------- ---------------------------------------- 2010 Honda 420 Rancher 4x4 IRS/PS (mine) 2006 Honda 350 Rancher 2wd (wifes) 2006 Honda 350 Rancher ES 2wd (daughters) 2001 Honda 350 Rancher ES 2wd (sons) 2007 Yamaha Rhino 450 (also mine) ---------------------------------------- ADD ME ON FACEBOOK ---------------------------------------- "If It Weren't For Physics And Law Enforcement I'd Be Unstoppable!"

Remove Advertisements Sponsored Links
Honda Rincon Forum Advertisement