Honda Rincon Forum : RinconRiders Honda Rincon Forums - View Profile: Corndog

Corndog Corndog is offline

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 10 of 10
  1. jcarlton
    06-28-2019 09:55 AM - permalink
    hey bud you seem to be the guru on these bikes . i have a question to ask you . this was my post

    hello all im new to the forum and have a issue . i have an 06 rincon and it was smoking when i got it . well between all the discussions on here and reading the manual i figured the it was the jug and piston was washed . got a new oem honda .25 piston with rings , machined .25 cyl (from a honda dealer) , new wrist pin and clips , and of course new gaskets . in 90% sure i have it timed right but she ticks and boggs down when i try to give her gas . so im thinking im off a tooth ? so i tear it back down and when i check the decompressor on the cam it has a awful lot of play in it ? and there is a wear spot on it as well . is this normal ?ive read where it is supposed to have a spring to put it back into place . mine does not spring back at all . any help would be great !! thanks
  2. Bstout
    06-11-2018 04:33 PM - permalink
    Hello Corndog Bstout here. I got me a 2005 rinicon 650 with 6000 miles and its making a ting------ ting--ting----ting intermittent noise when first start. seems to get faint and go away as it warms. Ive read about timing chain tensioner and checking it but I am not clear on location to do so can you help a guy out please. I am new to forum and have been reading many threads. just thought you might point me in right direction.
  3. BKR
    04-10-2018 04:29 PM - permalink
    The ride for this year is posted, can you make it?
  4. Corndog
    03-04-2016 10:13 PM - permalink
    Check in when closer. I would like to but I have been working out of town 1 week each month this year. I never know which week until 1 month in advance then I am locked in. Kinda sucks really but ends in December.
  5. BKR
    02-28-2016 04:11 PM - permalink
    Scott, I have booked cabins in Harlan for Sept 21 to Sept 25 this year, momma going to let you come out and play this year?
  6. Corndog
    07-28-2015 10:34 PM - permalink
    Not sure yet. I may have to work out of town that week. I will know by first of September. Wife is fine with it.

    My company took on a job in Indiana and I am only engineer licensed in that state in our office.
  7. BKR
    07-26-2015 10:57 AM - permalink
    Are you allowed to go on the ride with us this year?
  8. Joe maran
    06-17-2015 07:47 PM - permalink
    Joe maran
    corndog what part of Florida are you heading to
  9. Corndog
    04-30-2015 09:31 PM - permalink
    Hey Bill, that's my Birthday weekend. I have not been in the real woods ATVing in almost 2 years. I have been doing a bunch of motorcycle touring. At this point....YES, I would like to go. I will check with the wife.

    I missed this post with the site changing....duhhh. Thanks for the invite. Any other takers yet?
  10. BKR
    04-26-2015 04:09 PM - permalink
    Scott, I have booked 2 cabins in Harlan for 9/16 to 9/20, would like to know if you can make it this year.

  About Me

  • About Corndog
    Elk Creek, Kentucky
    Civil Engineer
  • Signature
    2003 green Rinny (12,400 miles), "25" Bighorn Radials (white letters out) full of extra slime, water pump mod, no warning labels, E Trex, everything else like Mr. Honda made it. 2000 XR 400r (est 3,500 miles). RIDE RED EVEN IF ITS GOT GREEN PLASTIC!

    2013 Yamaha Super Te'ne're' (27,400 miles in 22 months), 1996 Toyota Tacoma 4x4 (392,000 miles) on tight and original motor. 2001 4Runner (82,000 miles).


Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 11:25 AM
  • Join Date: 11-23-2004
  • Referrals: 0


No results to display...


11:23 AM - Corndog quoted Oilcan in post Machine creeps when in drive and in reverse.
There is a neutral (Between...
01:40 PM - Corndog quoted Foreman50018 in post Rincon oil overfill.
Corndog, would those tweaks, and ...
05:00 PM - Corndog quoted HighColorado+9k in post Rincon oil overfill.
Thanks Corn Dog I will raise the fro...
08:47 PM - Corndog quoted Oilcan in post 2004 Rincon - barely driven
...4? Don't worry, Oilcan can not read so he g...
10:50 PM - Corndog quoted Rainier in post New cam break-in procedure...
I hear about the break in pe...
08:07 AM - Mspringer quoted Corndog in post Rear Suspension And Brake Question
I did a tutorial on lubing t...
08:04 AM - Mspringer quoted Corndog in post Rear Suspension And Brake Question
I did a tutorial on lubing t...
07:31 PM - Corndog quoted ALEXANDER in post front brake issues
I'll try that. Didn't mention ...
09:35 PM - Corndog quoted Brandon2011Rincon in post Honda synthetic vs amsoil
I had my valve adjustment done at 20hr...
02:06 PM - Ultratec quoted Corndog in post Cam chain tensioner adjustment
esteemed...........I am blus...
08:01 AM - Corndog quoted Ultratec in post Computer crash
WOW!! Was almost bout to pick...
08:18 AM - 05Rincon quoted Corndog in post 05 honda rincon feels like clutch is slipping HELP
If it does it in all gears t...
03:27 PM - wsg quoted Corndog in post Cam Chain Tensioner Replacement
Yeah, this thread is a littl...
11:19 AM - MudChucker quoted Corndog in post How Many Rincon Riders Veterans are Still Posting?
I am still around lurking an...
07:21 AM - Oilcan quoted Corndog in post Black Mountain w/ BKR and Corndog
I sure had a blast. But now ...
09:03 AM - Oilcan quoted Corndog in post I think its time for a timing chain
Brain fart on my part....cav...
07:18 PM - Corndog quoted Goose305 in post New member and new to Rincons
Thanks! Should be ordering so...
09:51 PM - Corndog quoted Jameserizer in post Trumps First Day As POTUS
Please answer me this: HOW did ...
11:52 PM - Corndog quoted jeepwm69 in post Need help with missing hose
Isn't that the crankcase vent...
12:46 AM - tundrawolf quoted Corndog in post Sounds like rocks in my crankcase? 2002 carb Rinconc
Bad cam chain tensioner is m...
For the best viewing experience please update your browser to Google Chrome