Honda Rincon Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I've changed carb and TPS and it shifts 1-2 but kinda glides in gear but won't shift 2-3 at all. Can anybody tell me what to check? Thanks.... Really tired of messing with this thing.
 

·
Super Moderator
Joined
·
6,848 Posts
Start with the basics and check the warm oil level. TPS has nothing to do with shifting. Are the shift solenoids functioning? Does it rev higher in gear but not seem to go faster (any gear but try it from a stop in 2 or 3) Does the meter indicate the gear position while stopped? 1,2,and 3 should all be displayed)
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #3 ·
Start with the basics and check the warm oil level. TPS has nothing to do with shifting. Are the shift solenoids functioning? Does it rev higher in gear but not seem to go faster (any gear but try it from a stop in 2 or 3) Does the meter indicate the gear position while stopped? 1,2,and 3 should all be displayed)
All gears display but when you push the button for 3rd gear it don't change.
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #4 ·
Start with the basics and check the warm oil level. TPS has nothing to do with shifting. Are the shift solenoids functioning? Does it rev higher in gear but not seem to go faster (any gear but try it from a stop in 2 or 3) Does the meter indicate the gear position while stopped? 1,2,and 3 should all be displayed)
Oil level is good. Turning RPS it pulls hard all the way through the gears. I haven't and don't know how to check the solenoids. I've been away from 4 wheelers for about 20 or so years and a lot of the things on them now are new to me and I'm having a really hard time with this
 
1 - 4 of 4 Posts
Top