[wmrosborn]

several book locations for remove information
ordered o rings. gear, chain about a week on parts, I will disassemble and inspect to determine if I need any other parts if I'm in there for the chain I will need to pull the T/C to get the top bolt on the pump so it makes since to replace e the chain and gear at that time will update asi proceed thanx!

 

[wmrosborn]

ok here we go, pulled components as listed ,solenoids all, water pump oil cooler hoses panels for better access. about 3.5 hours. removed the case bolts used a rubber mallet to shock the case loose and found the oil pump chain had in fact jumped off the upper gear

have not removed the tourque converter yet.

I am replacing all pump seals the pump gear, the pump chain the cam chain tensioner lifter the cam chain giudes the cam chain. when I pulled the oil filter cover I found the oil filter dry so no pump function after oil change, also noted the oil was black so I will perform a flush after start up to clear anything I did not get while disassembled. also have not inspected the oil pump if I need to replace it I will update at that point....WRO

 

[Ultratec]

Nice!

 

[wmrosborn]

Nice!

I had to change the format on these two pics

View attachment 21677
View attachment 21676

Nice!

pretty clean case, very bad oil pump chain

 

[wmrosborn]

just a quick update still waiting on some parts, pulled the oil pump, the drive sprocket literally wobbles on the shift the bolt looked to be 1/4 of the way out of the shaft and the chain has a lot of wear on the inside from all of the deflection in the chain parts arriving Monday will inspect the drive sprocket behind th T/C thT will be an order item as well stand by to stand by this may be a maybe. WRO