Honda Rincon Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
118 Posts
Discussion Starter · #1 ·
hello

i have a few question to ask

1. what air cleaner should i get that will work good with the jet kit?
please tell me a part number and where to order it from

2. after you roll your atv how mnay times should you chnage the oil?

3. what jet setting should i start with? ( i live in WI )

4. will that 2" exhaust tip work ok with the jet kit?

thanks
 

·
Registered
Joined
·
613 Posts
1. K&N ha5000
2. I don't have any idea what you are talking about here.
3. I can not answer this one..I live in Cleveland
4. Yes the tip will work great with the jetting
Good luck...
 

·
Registered
Joined
·
118 Posts
Discussion Starter · #3 ·
what i mean for number 2 is


after a atv rolls over how mant times should you chnage the oil? or maybe you don't have to..but i would think you would have to chnage the oil cuase you would get gas in the oil...maybe not
 

·
Registered
Joined
·
118 Posts
Discussion Starter · #6 ·
ok cool

what is the "Air Intake Mods" i have heard about is that just a aftermarket air cleaner?

thanks

p.s after a atv roll over is there anything that should be done ( besides fixing what is broke...hehehe) i mean can a person start it right up after a roll over?
 

·
Registered
Joined
·
322 Posts
Yes, you can start it right up and drive it after you roll it. You may have oil in the airbox from the crankcase vent, but that's about it. I rolled my old 350 Rancher and it went sideways into a creek. Pulled it out, started it up and drove it back home.

My air intake mods are this: I removed the black cap at the beginning of the tube, cut a larger hole in the plastic, and removed the small air silencer between the carburetor and air box.
 
1 - 7 of 7 Posts
Top