Honda Rincon Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter · #1 ·
I just installed a set of the 25in ITP Holeshot ATR's and after a short ride I can tell I am going to love these tires. I would like to know what air pressure everyone is running in their ATR's and how they are holding up?
 

·
Registered
Joined
·
93 Posts
I think they felt good at 4psi.
 

·
Premium Member
Joined
·
3,800 Posts
I read somewhere that they reccomend 8psi. I have been running about 7 psi and it rides good and handles well.
 

·
Premium Member
Joined
·
1,362 Posts
My $.02 from Texas:

2 up riding on rocks- 8 lbs

Solo riding on rocks- 6.5 lbs.

Solo riding on sand, cactus- 5 lbs
 

·
Registered
Joined
·
54 Posts
I sell tires and wheels for a living. I would recommend running 7-8 psi in them. I thought I would outsmart myself when I went to Hatfield McCoy and ran them softer, about 4psi. I ended up with 2 tires with the sidewalls ripped. One front and one rear. I pinched the tire between rocks and the wheels. The reason is the radial tires flex so much more than bias tires do.
 

·
Registered
Joined
·
42 Posts
Discussion Starter · #7 ·
Just so you know, I called ITP about the air psi and was told to run between 4.5-5 psi.
 

·
Registered
Joined
·
38 Posts
yea!! good thing we had that air compressor for you buck, that was just pitiful!!!!!!!!!!!!!!!
 

·
Registered
Joined
·
143 Posts
I am running 7 in mine and think they are great tires.

John
 
1 - 9 of 9 Posts
Top