Honda Rincon Forum banner
1 - 2 of 2 Posts

8 Posts
Discussion Starter · #1 ·
i was putting the dyno jet kit in today and after i had put everything back together i noticed the hose on the bottom of the carburator was not connected to anything. is this the way it should be or am i missing something. this was my first time working on a carburator and i thought i noted were evrything went but i missed this one.
thanks in advance.

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.