Honda Rincon Forum banner

1 - 20 of 33 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter #1
Has anyone made mods to the stock muffler? I want the extra air flo without
the noise. I have heard of replacing the 3/4 tip of the muffler with a 1 1/2 tip, any one know where i can get one. Thanks for any tips..
 

·
Registered
Joined
·
338 Posts
go here atvnc.com...there is a guy on there that will hook you up,nice aluminum end caps..thats were i got mine..
 

·
Registered
Joined
·
42 Posts
Hi Toolman! I went to the site that you stated and I couldn't find the tip you told Poobah about. Can you tell me exactly where to look? Another couple questions: how much was the tip? And, did it help? Thanks!!
 

·
Registered
Joined
·
37 Posts
Discussion Starter #4
I can't find it also...
 

·
Premium Member
Joined
·
831 Posts
This is all I found at that web site in regards to the end cap mod.

http://www.atvnc.com/yabbse/index.php?topic=2585/msg26177#msg26177

It would be nice if somebody made these for sale on eBay or other sites. I would buy one if the price was right.
 

·
Registered
Joined
·
37 Posts
Discussion Starter #6
I e-mailed simoniz and he made them himself. They are $65.00 shiped to your door.
 

·
Registered
Joined
·
19 Posts
http://f1.pg.photos.yahoo.com/ph/markthebarber/album?.dir=/Rincon+Exhaust+Mod&.src=ph&store=&prodid=&.done=http%3a//photos.yahoo.com/markthebarber I found these pictures,Hope they help
 

·
Registered
Joined
·
42 Posts
$65.00 is crazy. I made one for $4.00 in materials and about 30 mins. in my garage. But that's just my 2 cents.
 

·
Registered
Joined
·
42 Posts
I replaced it with a new one. I didn't use stainless steel, just regular galvanized.
 

·
Registered
Joined
·
12 Posts
THE ONLY THING THAT I HAVE DONE IS CUT THE SPARK ARRESTER OFF BUT DID NOT FEEL A DIFFERENCE

DID NOT TOUCH THE BAFFLE

NOCTURNAL WHAT DID YOU USE FOR THE FLAT PART OF THE TIP
I HAVE THE INCH AND A HALF PIPE BUT HAVE NOT MADE A PLATE YET

THANKS FOR THE INFO
 

·
Registered
Joined
·
42 Posts
THERINCON - I bought a piece of flat steel 6" X 6" and cut a circle out of it and drilled a hole in the middle for the tail pipe to fit it. Then I just welded it together and drilled out the mounting holes. Hope this helps.
 

·
Registered
Joined
·
12 Posts
ok thanks nocturnal that helps alot
i will try it

looking for aftermarket exhaust that is good
but not as loud as the hmf

thanks again

k&n air filter or twin airs air filter ????
which would you choose
 

·
Registered
Joined
·
35 Posts
Hey guys,

Karl, who sometimes gets a chance to post here makes a really nice looking stainless steel 2" Rincon exhaust tip.

He sells them on E-bay. Just type in rincon in the search section and scroll through the stuff an you will find it.

I have one on my Rincon and really like it. It looks sharp, has made a marked difference in my stage 1 performance and sounds good but not near as loud as an aftermarket exhaust.

I heartily recommend this mod if you are looking for a low noise exhaust improvement. The only downside is that you have to eliminate the spark arrestor for this application. This may or may not be an issue for you.
 

·
Registered
Joined
·
7 Posts
Search on e-bay... $49.50 delivered to your door... at least thee have been some on there these past few days...
 

·
Registered
Joined
·
42 Posts
I just bought one of these. And by the way the person who is selling them is a woman. Funny how we always assume it's a man... :) I will let you know how it works out...
 

·
Registered
Joined
·
35 Posts
Hey Rhino Man,

Yep, you're right. Jen is Karl's wife and she does all the sales. Karl just makes em. Both good folks and a really nice looking product.
 

·
Registered
Joined
·
14 Posts
It's to bad Karl's 2 inch mod does not use a spark arrestor. I think the other mod(1.5"?) can use the grizzley arrestor.
 
1 - 20 of 33 Posts
Top