Honda Rincon Forum banner
21 - 23 of 23 Posts

·
Registered
Joined
·
1 Posts
on the oil pump was there any horizontal play? on mine the sprocket has play as well as the shaft slides in and out about a mm. Is this normal seeing there is no bearings or bushings?
 

·
Registered
Joined
·
1 Posts
I am having a hard time keeping the oil pump chain on the sprocket (all New parts). Your mod looks like a perfect fix!
I hope you don't mind, I have 2 questions:
Did you happen to make a template of the bracket you made?
I don't see in the photos where you used the torsion spring you mention.
Did you just adjust and tighten the guide in a fixed position without using the spring?

Thanks in advance!
dpw
 

·
Super Moderator
Joined
·
6,832 Posts
I am having a hard time keeping the oil pump chain on the sprocket (all New parts). Your mod looks like a perfect fix!
I hope you don't mind, I have 2 questions:
Did you happen to make a template of the bracket you made?
I don't see in the photos where you used the torsion spring you mention.
Did you just adjust and tighten the guide in a fixed position without using the spring?

Thanks in advance!
dpw
Hi
He mentioned pulling down on the pump while tightening the bolts holding it on. There seemed to be significant adjustment in just doing that. The guides made little difference. Bandsaw brackets.... awesome!
 
21 - 23 of 23 Posts
Top