Honda Rincon Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Hi, I have a 2012 Rincon, I rode it today and the steering felt weird so I started playing with it and the 4x4 is stuck on. When I play with the 4x4 switch I can hear something click, but it doesn't dis-engage it. I know something is wrong because if the bike is moving I can hit the switch and the light will come on, and it won't normally do that unless the bike is pretty much stopped.

Any thoughts?
 

·
Registered
Joined
·
52 Posts
Hi, I have a 2012 Rincon, I rode it today and the steering felt weird so I started playing with it and the 4x4 is stuck on. When I play with the 4x4 switch I can hear something click, but it doesn't dis-engage it. I know something is wrong because if the bike is moving I can hit the switch and the light will come on, and it won't normally do that unless the bike is pretty much stopped.

Any thoughts?
Switching 2wd to 4wd on the fly is normal. I use this a lot. Almost no delay. I think the light indicates it's engaged not the switch position.
Turn 4wd off and ride it should disengage, if it sticks try weaving a little.
 
1 - 2 of 2 Posts
Top