Honda Rincon Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
does anyone know of a good product to use on the plastic fenders on the rincon? my wife and i have a few small scratches that come with normal riding..ie: tree branches scratching the fenders. these are not deep scratches but surface scratches. i know you can't keep them looking new forever but i would like to try.

thanks in advance for your time

britt
 

·
Registered
Joined
·
59 Posts
You could try buffing them out with some very fine grit sandpaper, then use a heat gun to "smooth" it out. For gloss, use Mop-N-Glow or some industrial liquid floor wax applied in smooth thin layers with a dust-free cloth.

I restore my 86 250R plastic like this. Actually started out with quit a heavy grit, then finished with 400 grit, then the heat gun (you can watch it "smooth out") then floor wax. Looked better than new when done.

For the occasional touch up, just use mop-n-glow. It will shine better than new and last for a couple washings. And it's better than any "plastic renew" stuff you'll find.
 
1 - 2 of 2 Posts
Top