Honda Rincon Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
Got my Rincon at Jorgensen's in Utah. They said they jet all their ATVs: 152, I think.

I live at 8,500' which they said was the top range for the jet.

Checked the plugs recently (100 miles) and it was solid black.

The Rincon seems to be running OK -- maybe I don't know that it could be running better.

Anyone have any advice on adjustments?

Ton
 

·
Premium Member
Joined
·
3,621 Posts
Ton, a 152 is the standard sea level jet. Look in your owners manual to find the high altitude option. Don't have mine handy to look it up. It should be about a 140 or 142 for above 6000'.

I put in a Dyno Jet kit with their 140 jet, mine runs fine all the way up to about 12,500', still runs ok but it feels a bit on the rich side. If I did all my riding from 10,000' up I would go to a smaller size, most likely a 138.

After putting in the smaller jet it runs like a totally different bike.
 

·
Registered
Joined
·
4 Posts
i'm still experimenting with mine, im running a 136 in mine but i still need to get the rest of the jet kit. i ride usually from 9000 - 13000 ft
 

·
Registered
Joined
·
59 Posts
Dynojet sizes and stock sizes are different... so keep that in mind. You need to know if you're using one or the other before picking a size.
 
1 - 4 of 4 Posts
Top