Honda Rincon Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
102 Posts
I have a tiny tach on mine. Can't remember the part number, but I will look it up. As far as the hook-up its simple it has two wires one is a good ground (frame) and the other wire (red) you just wrap it around the plug wire. They don't say to do this but I use a little black tape on mine after wrapping the wire. Its a pretty good tach it is about 1 second behind on reading, but it is pretty accurate.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top