Honda Rincon Forum banner

Valve clearance adj.

1209 Views 0 Replies 1 Participant Last post by  redrincon9
Just adjusted my valve clearances last night. It was very easy, once you're able to set top dead center. The manual shows a picture of the alignment, but could have a little better description of finding TDC. It is much easier if you remove spark plug while pulling recoil starter to get tdc. It is good experience working with your machine if you have the time and patience. If yanyone needs tips, let me know.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.